Professional Road System

SRM Powermeter Professional Version
Making a start in SRM-power output measuring. With the professional system developed especially for the ambitious road cyclist. The watertight Powermeter is based on the particularly robust round housing made of hot-cured 7075 aluminum that has stood the test of time in thousands of racing bikes. It is available for both the square and Octalink sealed bearing and can be equipped individually.

Accuracy of measurement: equipped with four strain gages the Professional Powermeter provides data with an accuracy ratio of +/- 2%

7075 aluminum crank and chainrings, cranks are available in lengths of between 165 and 180mm

Compatible with Shimano Octalink Dura Ace and and Campagnolo square sealed bearing

Chainrings:
5-arm with 130mm bolt circle diameter. Small chainring compatible with 38 to 46 cogs, large chainring compatible with 50 to 61 cogs, Standard version: 39/53, in principle all nine and ten-gear models are compatible (see above for exceptions)
Weight from 827g

Colour
Standard: black/silver

ANT+ Wireless compatible

Includes:

• • SRM Wireless PowerMeter
  • SRM PowerControl
  • Cranks
  • Chainrings
  • Heartrate belt
  • Wireless speed sensor
  • Handlebar clip
  • Software
  • Manual
  • Multi-charger (works with both 110V and 220V)
  • USB download cable 

Aluminum Arms, Aluminum Spider
Crank Lengths Available: 165 - 180mm
Chain Rings: 53/39
Bolt Circle Diameters: 130mm outer ring, 130mm inner ring
Bottom Bracket: Shimano Octalink or Campy Square taper (not included)
System Weight: 1063g (PowerMeter, Chainrings, Cranks & BB)
Strain Gauges: 4
Cadence Range: 30-255 rpm
Wattage Range: 0-4096 Watts
Wireless Protocol: Wireless ANT+ Sport
Accuracy: +/- 2%
Battery Life: 1400 hours of use
Q-Factor: Approximately 144.5mm

Material: